PA5300  5channel 300W/100V/channel 5unit in one case, mono amp every unit

FEATURES:

1. 300W constant voltage amp, RMS power, transformerless output

2. 24hours continuous running design, high stability

3. 220V or 110V 50Hz or 60Hz ac supply selected

4. All aluminum case, good look high heat dissipation performance.

5. Power on auto diagnostic function, full protection inside.

6. 4u panel height ,148mm body height ,360mm body length, 400mm

total length.

7. RS485 remote control and status reply.

8. Auto temperature control system, fan speed and amp gain changed

when high temperature.

9. power level auto control system, delivery out power auto limited.

10.Class D Balance To Balance technology supported, high switching

frequency, lower EMI, better amplified signal output.

11.monitor speaker inside, monitor the output level and input signal

12.low pass filers and high cut filters inside, suit for broadcast application.

Specifications:

Power Source	110Vac or 220Vac 50Hz/60Hz
Diagram	Balance To Balance Class D
Input	5 channel Rca unbalance input 1.0Vrms Phoniex balance input 0.775Vrms
Rated Power	5channel 300W/33 Ω,100Vrms output
Frequency Response	75Hz-15KHz  +1dB/-1dB(active filter available)
THD	0.5% at rated power
Protection	OCP/OVP/UVP/DCP/OTP, thermal auto gain control, over current auto gain control
S/N	100dB
Control	RS485 control and status reply, amplifier stage on/off control, amplifier status reply on RS485
LED Indictor	Amplifier ready(GREEN) Over temperature(RED),auto diagnostic ok(GREEN) Input signal level(GREEN/YELLOW/RED)
Monitor	2cm8 Ω speaker， panel monitor volume adjust
Main Volume	Panel main volume adjust
Cooling	Aluminum case cooling and auto fan cooling
Operating Temperature	-10 to +40 ℃
Dimensions	400mm(Length)X471mm(Width)X178mm(height)
Weight	21.5Kg