PA6500S   5+1channel 500W/100V/channel, integrated auto backup unit

FEATURES:

1.100v constant voltage amp, RMS power, transformerless output

2.24hours continuous running design, high stability

3.220V or 110V 50Hz or 60Hz ac supply selected

4.all ferrite shield case, standard plug play design, 7units all aluminum amp unit  

assembled in one 3u standard case.

5.Power on auto diagnostic function, full protection inside.

6.RS485 remote control and status report.

7. auto temperature control system, fan speed and amp gain changed

when high temperature.

9. power level auto control system, delivery out power auto limited.

10.Class D Balance To Balance technology supported, high switching

frequency, lower EMI, better amplified signal output.

11.low pass filers and high cut filters inside, suit for broadcast application.

12.fixed 6^th channel as backup channel, auto online detection and switch

Specifications:

Power Source	110Vac or 220Vac 50Hz/60Hz
Diagram	Balance To Balance Class D
Input	5 channel Rca unbalance input 1.0Vrms Phoniex balance input 0.775Vrms
Rated Power	5channel 500W/20Ω,100Vrms output
Backup	6th channel set as backup channel
Frequency Response	75Hz-15KHz  +1dB/-1dB(active filter available)
THD	0.5% at rated power
Protection	OCP/OVP/UVP/DCP/OTP, thermal auto gain control, over current auto gain control
S/N	100dB
Control	RS485 control and status reply, amplifier stage on/off control, amplifier status reply on RS485
Cooling	ferrite case cooling and auto fan cooling
LED Indictor	auto diagnostic ok(GREEN),Amplifier ready(GREEN)
Temperature	-10 to +40 ℃
Dimensions	395mm(Length)X471m(Width)X132mm(height)
Weight	15Kg