PA6300S 5+1channel 300W/100V/channel, integrated auto backup unit
FEATURES:
1.100v constant voltage amp, RMS power, transformerless output
2.24hours continuous running design, high stability
3.220V or 110V 50Hz or 60Hz ac supply selected
4.all ferrite shield case, standard plug play design, 7units all aluminum amp unit
assembled in one 3u standard case.
5.Power on auto diagnostic function, full protection inside.
6.RS485 remote control and status report.
7. auto temperature control system, fan speed and amp gain changed
when high temperature.
9. power level auto control system, delivery out power auto limited.
10.Class D Balance To Balance technology supported, high switching
frequency, lower EMI, better amplified signal output.
11.low pass filers and high cut filters inside, suit for broadcast application.
12.fixed 6th channel as backup channel, auto online detection and switch
Specifications:
Power Source
110Vac or 220Vac 50Hz/60Hz
Diagram
Balance To Balance Class D
Input
5 channel
Rca unbalance input 1.0Vrms
Phoniex balance input 0.775Vrms
Rated Power
5channel 300W/33Ω,100Vrms output
Backup
6th channel set as backup channel
Frequency Response
75Hz-15KHz +1dB/-1dB(active filter available)
THD
0.5% at rated power
Protection
OCP/OVP/UVP/DCP/OTP, thermal auto gain control, over
current auto gain control
S/N
100dB
Control
RS485 control and status reply, amplifier stage on/off control, amplifier status reply on RS485
Cooling
ferrite case cooling and auto fan cooling
LED Indictor
auto diagnostic ok(GREEN),Amplifier ready(GREEN)
Temperature
-10 to +40 ℃
Dimensions
395mm(Length)X471m(Width)X132mm(height)
Weight
15Kg